Replacement steps of notebook keyboard: replace the notebook keyboard by yourself
laptop keyboard china laptop keyboard all brand laptop internal keyboard laptop inner keyboard
1. Before replacing the laptop keyboard, you must have bought a keyboard first, and then disassembled the keyboard. After the preliminary disassembly, we should go further.
2. Before starting to disassemble the keyboard, we should first unscrew all the visible screws at the bottom of the body. Find the clips that fix the keyboard, and then use a screwdriver to pry off all the clips. This is a work that tests technology. Be careful when prying off the clips. If you are impatient, the clips may be broken.
3. It is not recommended to use metal tools for disassembly. The keyboard and frame clips are plastic products. Prying the plastic with metal with higher hardness will cause a gap in the keyboard or frame. It is recommended to use a hard plastic shell.
4. There is a very important screw in the center of the bottom of the body, which is different for each laptop, but we can generally guess from the logo of the keyboard and optical drive beside it that this important screw is used to fix the keyboard and optical drive. Therefore, we must remember to unscrew the keyboard before prying it open. Some screws do not need to be tightened, which requires more attention.
5. Because there is a flat cable connection between the keyboard and the motherboard, be careful when removing the keyboard and motherboard. Remove the flat cable first. In addition to the connection of the keyboard, you may encounter various problems when disassembling the notebook
Some wires will be tight. Do not pull them up by hand. Be sure to use tools to lift them from the root to avoid disconnection.