New 14.1" W/15" 310MM LED Backlight Strip Kit From CCFL Lamp to LED Backlight Adjustable Brightness

New 14.1" W/15" 310MM Updated LED Backlight Strip Kit From CCFL LCD Screen to LED Backlight Adjustable Brightness

Length:310MM

Width:2MM

Thickness:2MM

Voltage for LED Strip:9.6V(It could light during 7-12V. It is dark lower than 9.6V and influence it's longlift if higher than 9.6V)

Light Leads:3014 cut 3 beads in one group

Color Tempeture: Above 10000

Characteristic: Adjustable Brightness

Converter: 

Universal Converter,Standard small slot for all Laptops.

Input Voltage:10-28V;    Output:9.6V

Size:8*1.1CM

One Set includes:

1*LED Strip

1*Converter

1*Cable

Characteristics:

1.Original LED Strip,High Brightness. Could not see directly.

2.LED Leads are arranged tightly.

3.Long Life-time. design for LCD Screen. Its life-time is up to 100,000 hours.

4.Easy to install.  Stick into LCD Slot with double-sided stickers or elsewhere.

5.Energy Saving. Power is only 8W.  Power for 4pcs CCFL is 24W.

Installation Instructions:

If yours is an inverter,just replace the inveter inserting into the drive board.

If yours is high-voltage power supply integrated plate,power it and find 12V capacitance. Then unplug the power.

unplug the part which connect to the negative pole of 12V capacitance with multimeter. Connect three cables on boost board,12V,ON,GND.  Connect the 12V on boost board to positive pole on the integrated plate. GND with negative pole.

On with ON/OFF.  In simple terms, it is unplug the power of previous high-voltage and replace it with boost board. take power

in front of primary hypertension.

Installation Steps:

1.Open the metal frame.

2.Remove the glass of lcd screen.(be careful with the cables).

3.Remove the innver plastic frame and lamp holder(Pay attention not to make the inner component in backlight dirty)

4.Take the CCFL Lamp off from the lamp holder.

5.Paste the LED Strip into lamp holder

6.Return to the original condition

7.Install the LCD Screen and frame.

8.light it.

Please note that the length for LED Strip below 417MM could be cut. 3 Beads in one group.

1.What is the length of the Lamps?

It is glass part.Not include the pins on two sides.

2.Is the quality good?

Yes.All Lamps are 100% new.

3.When do you send my order?

We usually send in 2-4 working days.

4.Are the lamps safe on the way?

Yes.We pack them in bubbles first,then hard tube,then air bubble outside the tube.Then hard Box and tape.So it is very safe for you.